An easy to follow rooting guide for Samsung Galaxy S7 SM-G930W8 is now available at TrueAndroid. Rooting is absolutely necessary to perform system level tweaks. Also few advance apps that available at Play store require root. In this page you will find an easy to follow guide. This rooting tutorial tested on Android 7.0 Nougat Samsung official firmware. Trying it in another version may soft brick your device.
To root Samsung Galaxy S7 SM-G930W8 we will use CF-Auto-Root. This rooting method developed by renowned developer Chainfire. Its comes with SuperSU binary and install SuperSU app for root access management. This rooting tutorial that allow you to root Samsung Galaxy S7 SM-G930W8 running on official firmware won’t require custom recovery such as CWM recovery or TWRP recovery, instead we will use ODIN utility.
Also Read: Benefits of Rooting Android Devices
Warning!We at True Android produce tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Samsung Galaxy S7 SM-G930W8. Don’t try this guide in any other Android device. It may hard brick your device.
As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.
1. Backup your device data. You can follow our ultimate backup guide.
2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.
3. You already have USB Driver Installed for Samsung Galaxy S7 SM-G930W8 in your PC. [Download USB Drivers]
4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Samsung Galaxy S7 SM-G930W8. [Guide].
So, you done everything that we mentioned above, right! Now, you are ready to move towards next stage of this guide where we summed up detail instruction on how to root Samsung Galaxy S7 SM-G930W8 running official Android firmware. Remember, it’s very important for you to follow everything that we mentioned below to successfully root your Samsung Galaxy S7 SM-G930W8 on official Android firmware.
Note: Both flash and Knox counter will be triggered due to performing this rooting process.
Complete Rooting Tutorial Of Samsung Galaxy S7 SM-G930W8
Step 1: Download CF-Auto-Root-heroltebmc-heroltebmc-smg930w8.zip.
Step 2: Now extract CF-Auto-Root Zip at a convenient location in your desktop; you should get a .tar.md5 and Odin v3.10.6 within extracted folder.
Step 3: Now turn off your Samsung Galaxy S7 SM-G930W8 by long pressing Power button and then tapping on Power off option. Wait 5-6 seconds for vibration to confirm complete switch off.
Step 4: Its now time to boot your smartphone into Download Mode by pressing and holding down the Home, Volume Down and Power button together. A warning screen will come up; press Volume Up button to enter Download Mode.
Step 5: Now run Odin3 v3.10.6.exe that you get in Step 2, as an Administrator because Admin privileges is required to complete this installation process smoothly.
Step 6: Now it’s time to connect your Samsung Galaxy S7 SM-G930W8 with your PC using USB cable. Do it and you will see a message under Odin’s message box in the bottom left saying “Added!!”. If you don’t get it then you should try another USB port (try USB port located in back of your desktop PC cabinet). If this still can’t solve your issue then you should reinstall USB driver for your device. However. if you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number, below ID:COM.
Step 7: Now, click the AP Button, and select the CF-Auto-Root-heroltebmc-heroltebmc-smg930w8.tar.md5 file that we received at Step 2.
Step 8: In Odin window, make sure Auto Reboot and F. Reset Time checkboxes are only two that are selected.
Step 9: To make flashing safe for you double check everything that we mentioned in Step 7 and Step 8 above. Now, once you are ready, hit the START button to begin the flashing process. You can see the progress on your Samsung Galaxy S7 SM-G930W8 screen.
Step 10: Once installation is done, your device will reboot automatically and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can then safely unplug the USB cable to disconnect your device from computer.
That’s it! Your Samsung Galaxy S7 SM-G930W8 running on stock Android firmware is now rooted. You should now see SuperSU app in your app drawer. Tap on it and it will ask you to update the binary. The app also prompt you to disable Knox when installed.
Once done, you can then install apps that require root permission as well as access system files. To confirm if you successfully rooted your Samsung Galaxy S7 SM-G930W8 or not, install an app called “Root Checker” which is available for free from Google PLAY store. We recommend you to check out Best Apps For Rooted Android Devices (Android Phones & Tablets).
To unroot your device either flash an official firmware (use our search box) or open SuperSu, then tap on SETTINGS tab and then select Full unroot under CLEANUP section as shown above.